KELLER support

Which is the current version?

D (Software maintenance for CNCplus V6.0 ended with R353.17 and R352.17 respectively, followed by a free-of-charge changeover

Darken the "light blue" colour tone for low-contrast monitors

All colour tones used for the SYMplus™ interface are stored in the cncplus.env file in the \gui subdirectory of the user data ... and gaps in gap checks. The standard colour (RGB) for this is #W14 CC E8 FF Alternatively, try e.g

CustomerPortal - CmWAN licenses

(PDF, page 5)

Administrate users in the „KELLER Cloud“ Both technologies and installation files in several languages (German, 中文, English, Français, Español, Nederlands, Português, русский, …) are always available on our website and via shortlink http://dl.cnc-keller.com

Where do I find the user data?

for c:\users\%username%\appdata\roaming During installation the path of the user data is stored in file dir.dat in the system data folder. A default set of user data will be stored as zip file in the system data folder during installation

Postprocessors are available for which controls?

Turning Postprocessors for the following controls are included by default in SYMplus™ with plusCARE™: BOEHRINGER B1T, B2T, B32T, B3T BOSCH ALPHA 2, BOSCH CC 100T, BOSCH CC200T DIN/PAL 1994 EMCOtronic T1 ENGELHARDT 3300 FAGOR 800T, 8055 T FANUC 0i-TB, 0T

Service data of SYMplus™

Via F1 path you can specify in which directory the 'zip-file' should be stored ... header of a program that was written directly on the controller or that was previously transferred to the controller and started

How to copy Tool database and Magazine/Turret

These have the suffix * .rv1 and are usually stored in a subfolder of the user data

Off colours, black icons, header and footer

Up to version 6.0, this user data was stored by default in c:\Users\Public\KELLER

Tool change position PAL Turning

According to PAL (and also according to PAL2020), the G14 command can be used to move to a tool change point stored in the (fictitious) controller, the coordinates of which refer to the tool carrier reference point

Simulate reclamping in control simulators

the first side, e.g. with G59 Z-1. In the Postprocessor settings, it is possible to store the M999 function for reclamping under

3D-Simulation coloured (Turning)

Up to 10 colours can be stored as RGB colour values in the vorein.ini file

Set up network server for Codemeter

You can easily make the licenses for the KELLER software stored on a CmStick ("USB dongle") available in the network. To do this, you either need a server or you can set up any PC in the network accordingly

Transfer user data from old version

In principle, however, the path to the user data was also stored in the dir.dat file in the system data for older versions

Run UpdateManager "silently"

and where a corresponding log file should be stored at the end of the update process

Subprogram (PAL)

a writing error, if the subroutine has been written separately in "free mode" and an error has occurred (e.g ... The possibility of changing to the free mode with F7 Editor is not available

Rewrite old pal programs for PAL2020

Here it is recommended to first comment out the "old" cycle blocks in the "free editor" and then to reprogram them in the guided ... ) with all other functions, because here there is a simple assignment between old and new: In the "Free Editor" you can use the

No solution found?

Filter categories

Filter by article type